Graphene Ceramic Spray Coating™ Advanced Basic Kit 35 Reviews
$59.99 $54.99

Adam’s Graphene Ceramic Spray Coating™ Advanced is an easy-to-use Ceramic Coating that can be seen where applied using the Adam’s UV Flashlight and our patent-pending UV Tracer Technology™. This coating is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.

  • Less Prone to Water Spotting
  • Lower Sliding Angle With Water Evacuating at Angles < 10-15°
  • Higher Contact Averaging 110-118°
  • Higher Stain Resistance Against Bugs, Saps, Droppings, etc.
  • Higher Scratch and Mar Resistance During the Washing Process
  • Easier to Apply, Slicker, and Glossier Than Conventional Ceramic Coatings
  • 100% Increased Coating Resin Over Graphene Ceramic Spray Coating™
  • Add 18-24 Months of Ceramic Protection in Minutes
We currently offer free shipping in the continental US on orders over $115 after discounts or $5 Flat Rate Shipping. If you don't love what you receive, we'll cover shipping back to our door too. Please note, free returns are not included on international orders.
Customer Reviews
4.9 Based on 35 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • shine
  • coating
  • results
  • towels
  • cars
  • durability
  • Adam
  • Everything
  • finish
  • applicator
Jeff S.
United States United States

New Tech is a Winner!

love this product! first time i have used the graphene formula; found it to be pretty intuitive and simple to apply once i got used to seeing when the coating had "set/cured" (it rainbows) and then wiping it off to remove the oils and leave the "shell." plan to use on my other cars/trucks as well!

Jonathan M.
United States United States
I recommend this product


Ordered the kit just to see how it was I used it on my wife’s truck it came out amazing I was surprised at how well it worked it is much quicker than the other coatings to use

Martin M.
United States United States
I recommend this product

Ceramic Graphene coating

Have been using Adams products for quite a few years. Never been disappointed with any of them. The Graphene ceramic coating is incredibly easy to apply and remove. Unbelievable shine and water beading. Great product.

Paul M.
United States United States
I recommend this product

Easy to use

Easy to use and with great results you will love the look of your vehicle. Defintake the time and look at all the YouTube videos. Easier to do than it first sounds.

United States United States
I recommend this product

Graphene Ceramic Advanced Spray

I loved how easy it was to apply this product and how smooth and shiny my truck is now! The downside to this was after applying I waited for the rainbow sheen to disappear (like I was told to on your Adam’s YouTube video) It took some serious arm strength/pressure when wiping away with your seamless microfiber towel to get this to not show any streak marks from the ceramic spray. I have a black truck, so maybe it just shows everything.. My only recommendation would be to not wait for the full rainbow sheen to disappear before you wipe it away.

Kit Contents:

(1) Graphene Ceramic Spray Coating™ Advanced 12oz

(2) Borderless Grey Microfiber Towel

(2) Microfiber Applicator


  1. As with any Ceramic Coating, preparation is key. Use an Adam's Clay Bar/Mitt and an Adam's Swirl Killer to remove contamination, oxidation, swirls/scratches for optimal results.
  2. Maximize protection by using Adam's Surface Prep to remove any surface oils, or residues.
  3. Spray Adam's Graphene Ceramic Spray Coating™ Advanced into a Microfiber Applicator, or an Adam's Premium Microfiber Towel.
  4. Wipe the product onto the paint, allowing the surface to be fully covered.
  5. Allow the product to sit for 1-2 minutes.
  6. Buff to a high shine with an Adam's Premium Microfiber Towel.
  7. Allow 4 hours to cure before exposure to elements.


  1. “Can I layer this product to make it last longer?”

Yes, of course, but that doesn’t mean layering this product 10 times will make it 10x longer— any application after 3 rounds will render the product redundant and still provide the same hydrophobic effects. 

  1. “What is Ceramic Glow Technology?”

Ceramic Glow Technology™ is Adam’s Polishes Patent-Pending chemistry. It’s a crystalline form of an optical brightener that absorbs energy and emits light as it relaxes back down to a lower energy state.

  1. “What’s the difference between fluorescence and phosphorescence?”

Length of time that the light is emitted. Said another way, the amount of time it takes for the electrons to relax and quit releasing energy in the form of photons or light.

  1. “Does the UV Coating act as a durability indicator?”

No, it doesn’t. It’s currently offered as an application aid and utility for visualizing the coating. Lack of glow does not indicate lack of coating.

  1. “Why does the product glow more intensely on some substrates than others?”

Differences in porosity and the ability of the coating to penetrate and bond to different surfaces will cause different levels of film thickness. The thicker the film, the more intense the glow typically.

  1. “Will my car glow blue in the sunlight?”

No, because this coating is completely invisible and clear under standard light, the coating will only glow a bluish hue under the 395 NM UV light.

  1. “Will this coating glow after being “charged” with the UV light?”

No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes-- these slowly become excited under any light and will diminish over the course of a few minutes. 

  1. “What can I use this on? Can I just use this on the whole car?”

Adam’s UV Graphene Ceramic Coating provides protection to an extreme range of areas on your vehicle including Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components, Headlights, Bed liners, - all are safe to be protected.

  1. “What happens if I forget a spot or end up with a high-spot?”

If you forget a spot and you catch it in time (10-20 minutes after removal) simply reapply to that area and wipe off after 1-2 minutes. Reactivating the product will allow for easier removal. If left on for longer, we recommend Brilliant Glaze and a microfiber applicator, or machine polishing with Correcting Polish to fully remove the imperfection.

Stay In The Loop