Adam’s Sprayable Compound is a cutting-edge, heavy correcting compound designed to save you time and money during your polishing steps. This body-shop safe, user-friendly formula allows you to both prime your pad and reapply compound as you correct your vehicle. Adam’s Sprayable Compound is an effective tool for removing heavy stains, swirl marks, buffer halos, and heavy imperfections from your clear coat. By spraying the product into the pad, you’re both priming the pad before polishing and using a minuscule amount, instead of over applying product to your pads. Users looking to fully perfect their paint are one step away from perfection with our polishing system, and Adam’s Sprayable Compound makes any polishing task a breeze of ease.

Adam’s Sprayable Compound is made for all detailers, by professional detailers. The water-based formulation features a Diminishing Abrasive Technology blend of aluminae oxides and polishing agents to cut swirls fast and effectively, while leaving a brilliant finish behind. When using a conventional compound or polish, you’re applying 4 pea-sized drops to the pad surface then spraying Detail Spray onto the surface to both wet the pad and allow the product to travel out to the outer edge of the pad to completely cover the surface. With Adam’s Sprayable Compound, you’re removing the worry of caking up your pads, clogging up fibers of your microfiber cutting pads, and keeping your compound working more effectively for longer!

Adam’s Sprayable Compound is VOC compliant and body shop safe and versatile enough for any type of polishing pads or machine polishers. This product can be used on clear coat, single stage, and lacquer paints, however, it is recommended for use with a softer pad and slow speed first to see how quickly your finish is corrected. This compound begins as a heavy cutting product, but finely polishes down to remove fine swirl marks, and oxidation without micro-marring your finish. Since the product is thin enough to be sprayed out of a standard trigger sprayer, this product will not clog up microfiber cutting pads, foam polishing pads, or hybrid pads like our One Step polishing pad.

Adam’s Sprayable Compound should be used primarily as a step-one compound to remove heavy oxidation and swirls-- the thin formulation allows the abrasives to break down into a fine polish, creating a haze-free finish to easily move to step-two. Should scratching, oxidation, or swirl marks still reside, move to Heavy Correcting Compound and a Microfiber Cutting Pad to further correct your finish.

Adam’s Sprayable Compound is designed for use with any polishing pad. If heavy correction is needed, you ideally will want to use this product with a heavier duty pad, or more dense foam. The more aggressive the pad, the quicker the painted surface will heat up, ultimately providing a faster correction.

For Use With:

Adam’s Microfiber Cutting Pads

Adam’s Orange Foam Correcting Pads

Adam’s White Foam Finishing Pads

Adam’s One Step Polishing Pads

Adam’s Blue Foam Polishing Pads

Adam’s Premium Microfiber Towels