Adam's Fabric Protector Gallon With Free 16oz
Adam’s Fabric Protector was designed to allow for easier clean-up and stain prevention from everyday spills such as coffee, soda, food, snow and other liquids that might wind up in your vehicle. It’s suitable for a myriad of textiles and fabric styles ranging from convertible tops, cloth seats, Alcantara, suede, carpets, floor mats, and even furniture.
- Ready to Use, Solvent-Based Formula
- Rapid Cure – Fast Flash & VOC Exempt
- Provides Extreme Hydrophobicity to Absorbent Surfaces
- Suitable for a Variety of Fabrics and Textiles
- Durable Fluoro-Silicone Resin Lasts 1-3 Months
Adam’s Fabric Protectant is a nano coating that is comprised of a penetrating, reactive fluoro-silicone resin that adheres to textile fibers and produces strong water and oil repellency, stain resistance and liquid removal performance without changing the look and feel. This solvent-based formulation quickly dries in as little as an hour and produces an effect that can last for 1-3 months depending on abrasion.
Instructions for General Use:
- Ensure fabric to be protected is clean and dry before application.
- In a back and forth motion, with overlap, saturate the surface ensuring even coverage.
- Once sufficiently covered, allow area to air dry for at least one hour but several hours is best.
- Avoid spraying onto unintended surfaces that are non-fabric.
Instructions for Carpeting/Floor Mats:
- Ensure carpeting or floor mat is clean and dry before application.
- Using an Adam’s Cockpit Brush, comb the fibers in a single direction.
- In a back and forth motion, with overlap, saturate the carpet ensuring even coverage.
- Once sufficiently covered, allow area to air dry for at least one hour but several hours is best.
- Repeat Steps 2-4 but comb the fibers in another direction. Repeat this until the carpeting has been protected from each of the cardinal directions (i.e. North, South, East and West).
- Avoid spraying onto unintended surfaces that are non-fabric.
When Cleaning a Spill:
To preserve the life of the coating and promote maximum durability, blot out spills with a clean, dry microfiber towel and avoid rubbing the liquid into the surface.
