Graphene Detail Spray™ & 2 Towel Combo 4 reviews
$35.00

Graphene Detail Spray™ is modeled after our most iconic and versatile product, Adam’s Detail Spray! Simply spray and wipe for a streak free, brilliant finish which now also provides additional slickness, gloss, depth of color and relentless water beading all its own.

Due to the unique nature of graphene-oxide, we are able to formulate the same resins contained in our Graphene Ceramic Coating™ and Graphene Ceramic Spray Coating™ directly into water-based systems, such as our Adam’s Detail Spray! This added functionality allows Graphene Detail Spray™ to universally extend the life of any of our waxes, sealants and even coatings or be utilized as its own form of stand-alone protection. Unlike Adam's CS3, Graphene Detail Spray™ is designed to work best on a clean, freshly washed surface and is not intended to act as a type of waterless wash.
  • Over $32 In Value
  • Enhance Gloss, Slickness & Depth of Color
  • Generates a Highly Hydrophobic Surface
  • Extends the Protection of Waxes, Sealants & Coatings
  • Easy, Streak Free Finish – Safe on All Surfaces
  • Pink Passionfruit Fragrance

Included:

  • Graphene Detail Spray™ 16oz
  • 2 Single Soft Microfiber Towels
We currently offer free shipping in the continental US on orders over $100 after discounts or $5.00 Flat Rate Shipping. If you don't love what you receive, we'll cover shipping back to our door too. Please note, free returns are not included on international orders.
Customer Reviews
4.0 Based on 4 Reviews
5 ★
75% 
3
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
25% 
1
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    CB
    12/01/2020
    Captain B.

    We use it on the yacht.

    I run a 112' Westport yacht, we maintain our own paint/top coating. After we cut and polish the surface, we apply a good amount of Graphene to topcoat the surface. When it rains in South Florida, the water pours off the boat like crazy. When the guys go to wash the boat, it takes less than half the normal time, because nothing sticks to the paint, it's fantastic. I just wish I could share a picture with everyone. Long story short, my entire team loves the Graphene spray!

    R
    09/03/2020
    Randy

    Love it

    I love this new addition. I use it a lot on my customers cars and it leaves great gloss behind.

    W
    08/29/2020
    Will

    Easy to apply and remove!!!

    Great product! Makes the drying phase way easier. Helps maintain ceramic at its beet condition. Leaves no streaks!!

    R
    08/20/2020
    Rod

    Streaks when removing

    I have all three of Adam's Graphene products and I love the both ceramic coatings. However, the detail is impossible for me to remove without streaking and blotching on my metallic black paint. I tried adding replying the detail spray to reactivate it but no luck. I had to polish off the finish. I tried to re-apply it again and the same result. I was using fresh, clean Adams microfiber cloths to remove the detail spray but to avail. I did not apply too much. Both of Adam's Graphene Ceramic coatings were much easier to remove with perfect results! I'm going to see if Adam's will take back this product on their 110% guarantee.


    Instructions for General Use:

    1. Spray a fine mist onto one panel at a time or directly into a premium microfiber towel.
    2. Wipe with a premium towel such as any of Adam’s Microfiber towels.
    3. Flip towel over to a fresh side and wipe again for a streak free shine.
    4. Repeat on remainder of exterior of vehicle.

     For Use When Washing as Drying Aid:

    1. After vehicle has been rinsed and still dripping wet, mist each panel, glass and plastics.
    2. Use a clean Adam’s Great White Drying Towel to dry vehicle completely.

    For Use with Adam’s Visco Clay Bar:

    1. On a clean vehicle, spray a fine mist onto one panel at a time, including glass.
    2. Stretch Adam’s Visco Clay Bar to fit over Geoimpression Tool or use by hand.
    3. Using light-to-moderate pressure, rub clay over surface until surface feels smooth.
    4. Periodically fold clay to a new, clean surface once thoroughly contaminated. Repeat for all exterior panels and glass. 

    Common Sense Warning:

    With using Graphene Detail Spray™, a little goes a long way. Spray lightly to achieve a streak free finish. Applying liberally can leave undesirable smearing or streaking. Change towel periodically, especially when laden with product. Work quickly when using in direct sunlight.

    Stay In The Loop