Adam’s Ceramic Liquid Wax is user-friendly, durable, and extremely hydrophobic! We took our fan favorite Ceramic Paste Wax and created a liquid cream version to allow for easier use and better application for both hand and machine application. This blend has a unique formulation of gloss agents and SIO2 concentration to allow for effective bonding and easy removal, ideal for topping your current coating, or as a standalone product.
Adam's Ceramic Liquid Wax is a fully-synthetic, silica-infused wax. This special formula works outstanding on any paint finish, but it is perfect for use as a topper over a ceramic coating, if you have the urge to apply a wax onto a coated vehicle. We receive dozens of phone calls and emails asking if it is safe to apply our Paint Sealant, Buttery Wax, Detail Spray, Americana, and so on over a ceramic coated vehicle. While you can apply these products over a ceramic coating, they can detract from the behavior of the coating itself. This is where Adam's Ceramic Liquid Wax fits into the detail process - it's the perfect option for those that wish to apply another layer of wax protection on top of a ceramic coating.
At 30% SiO2 content, Adam's Ceramic Liquid Wax provides increased detergency resistance (more stability through multiple washes), temperature stability (higher melting point), and greater hydrophobic behavior (more water repellent) over its natural counterparts. Since this wax is inorganic, this also makes it more uniform, as it is not based on a naturally derived wax. This Ceramic Liquid Wax can last up to twice as long per application as a traditional carnauba waxes given its inorganic makeup. Application is just as easy as a carnauba wax and can be applied by hand or by machine with our Gray Applicator Pad. It should be treated slightly different, by applying it to one panel at a time or smaller and then removing with a plush microfiber towel before moving onto the next area.
Hand Application Instructions:
1. Apply a small quarter-size blob onto Adam’s Wax Applicator.
2. Spread onto surface in a thin, even layer, try to avoid panel gaps and edges of body lines.
3. Allow to dry a few minutes. In higher humidity climates, please allow for longer time periods.
4. Buff away residue with a clean premium microfiber towel.
Machine Application Instructions:
1. Apply 4 small drops onto Adam’s Gray Foam Pad.
2. Set orbital to low speed. Pressure is not needed on machine polisher when waxing.
3. Follow steps 2-4 above.
I applied this last October and the beads are still rolling off when it rains, even with two solid months of salty highways. It's only been hand washed twice since applied and has sat out in the weather 24 hours a day. It is easy to apply like the buttery wax and the shine, as everyone else has stated, is better than expected. What I noticed the most, over and over when it got wet, was the hydrophobic properties. The beading is unlike anything I've seen. My car seemed to collect beads the size of half dollars on the flat panels and sheeted away after driving. I hadn't planned on this item being a permanent part of my collection and offering to customers, but it is now.
I had my new black Titan ceramic coated last July. I've been using the ceramic boost with good results, but wanted to give this a try. Seriously, the shine is out of this world. I'm not one to write reviews, but this product absolutely blew my expectations out of the water.
While I love the ceramic boost, again this provides the shine and surface I was looking for. If you ceramic this is a must product. Absolutely love it. You know when people ask what you’re using in your car, your product is Exceptional. Well done Adams!
Put this ontop of my ceramic coating from adams and wow this stuff makes your car look dripping wet! Highly recommend! (use one of the polishing towels to take it off it will help with the thickness of the wax) :)
HI, used the liquid wax after a terrible clay job i did. I ran out of clay lube , did the IPA wipe down before i applied the liquid wax. I was expecting good but have to say great product. It was a alpine white bmw that the paint has been cared for but the paint needs attention. Not only does this was go on fairly easy and come off fairly easy but it shines terrific. not an easy task to do on a white car. From a 1-10 i give this product a 9.5 till i see how it holds up in the hot sun and car washes. One interesting thing i did notice is the alpine white after its clayed sometimes has dirt marks in the paint. It seems like there is a cleaning agent in the wax as well because as i applied in a couple areas the brown marks came out of the paint Excellent product. Wanted to review because i dont have a coating on the car at first i was hesitant to use this without one but great results.