Adam's Foam & Seal Combo
Adam’s is bringing the convenience of a quick, express wash system to your driveway! We’re taking advantage of the advancements in our Premium Foam Cannon and Premium Foam Gun to utilize Ready-to-Use (RTU) technologies to make maintenance of your vehicle faster and even simpler! Our straightforward, two-step system is comprised of a strong foaming wash for decontaminating and lubricating during the wash process, Adam’s Foam - 01, which is then followed up with a sprayable protective sealant and drying aid, Adam’s Seal - 02. Adam’s Foam & Seal, in combination, ensure the most consistent and thorough results you’ve ever experienced from a quick, routine, maintenance wash.
- Step 1 of 2: Decontaminating Snow Foam to Clean and Lubrication
- Step 2 of 2: Generates High Gloss, Slickness and Tight Water Beading
- Ready-to-Use by Directly Attaching to an Adam’s Premium Foam Cannon or Premium Foam Gun
- Foam 01 - Color Shift: Blue & Green with Eucalyptus & Lime Scent
- Seal 02 - Aqua Blue Color with Strawberry Scent
Instructions for Use with Foam Cannon/Gun Foam 01:
- Briefly wash/rinse the vehicle to lower the surface temperature and wet the surface prior to application of product.
- Attach the bottle of Adam’s Foam – 01 directly to the 28-410 threading built into the Adam’s Premium Foam Cannon or Premium Foam Gun. Adjust the fan pattern and open the dilution all the way to consume the maximum amount of product. Attach the Adam’s Premium Foam Cannon to pressure washer hose or Adam’s Premium Foam Gun to garden hose and start the flow of water.
- With a wash mitt laying on the windshield, foam the product onto all exterior vehicle surfaces including wheels and wheel wells. While the product is residing, agitate with the wash mitt working from the top of the vehicle down, flipping it over halfway through the vehicle wash. Utilize a wheel and tire brush to agitate the tires and wheel faces.
- Once fully consumed, remove the foaming attachment and rinse the surface thoroughly clean with fresh water.
- Proceed to the next step: Adam’s Seal – 02.
Instructions for Use with Foam Cannon/Gun Seal 02:
- Following application of Adam’s Foam – 01, directly attach the bottle of Adam’s Seal - 02 to the 28-410 threading built into the Adam’s Premium Foam Cannon or Premium Foam Gun. Utilize the same fan pattern and maximum dilution rate as the Adam’s Foam – 01. Attach the Adam’s Premium Foam Cannon to pressure washer hose or Adam’s Premium Foam Gun to garden hose and start the flow of water.
- Spray the product onto all exterior vehicle surfaces including wheels and wheel wells.
- Once fully consumed, remove the foaming attachment and rinse the surface thoroughly clean with fresh water.
- Dry the vehicle using a quality microfiber towel, such as an Adam’s Great White Drying Towel, or in combination with forced air such as Adam’s Air Cannon Dryer or Air Cannon Jr.
