If needed, the product can be removed using a cleaner and a quality microfiber towel or re-deposited by simply reapplying the product to treat the surface once more. Persistent use of the product as an alternative to a glass cleaner will maintain the effect indefinitely.

Adam’s Anti-Fog Solution will not damage or harm surfaces and is safe for tint, navigation screens, lenses, and all types of glass, mirrors, and even plastics! Try it on goggles, safety glasses, helmets, visors, and face shields!

Instructions for General Use:

1. If desired, clean and prepare surface by using Adam’s Surface Prep. Adam’s Glass Cleaner is not preferred, since it has a hydrophobic additive built into it. If Adam’s Surface Prep is unavailable, the Adam’s Anti-Fog Solution will work well even with the surface unprepared.
2. Shake well before use. Apply a liberal amount of Adam’s Anti-Fog Solution directly onto a microfiber applicator. Spread a layer onto the surface, evenly, using the applicator in a cross-hatch motion. Adam’s Anti-Fog Solution will flash quickly leaving a haze.
3. Wipe down the haze using a quality microfiber towel and observe from many angles to ensure no smearing or streaking. Continue to wipe down with fresh sides of the microfiber towel until the surface has clarity.
4. Anti-fog effect will be immediate with no cure time required. Reapply as frequently as desired. If any haziness appears, simply wipe down with a microfiber towel – the effect will persist despite repeatedly wiping down.

Common Sense Warning:

Adam’s Anti-Fog Solution leaves a coating film behind. Agitation or touch may ruin the effect as the surface can be modified. Reapply product when and where fogging manifests to eliminate visual impairment.

Note: Some prescription glasses, designer sun glasses, and other eyewear are made with engineered materials or coatings that may resist Adam’s Anti-Fog Solution from generating the desired effect. Keep in mind that some surfaces are unlikely to be able to be made anti-fog with this product.