Ceramic Metal Coating Wipe 4 reviews
Sold Out

Select Option

Provides long-lasting, extreme hydrophobic effects for aluminum, stainless steel, and other metal surfaces. Adam’s Ceramic Metal Coating is a simple, ready to use system that combines versatility with ease of use. In the kit, you find everything you need to both effectively prepare metal surfaces for the coating, and apply the coating all in one procedure.

  • Saturated Ceramic Wipe
  • 9H Metal Ceramic Coating
  • Wipe on, Walk Away Formula
  • Covers 4x4 Surface Area
  • Mesh Wipe Material
  • Made in the USA
We currently offer free shipping in the continental US on orders over $115 after discounts or $5 Flat Rate Shipping. If you don't love what you receive, we'll cover shipping back to our door too. Please note, free returns are not included on international orders.
Customer Reviews
3.0 Based on 4 Reviews
5 ★
25% 
1
4 ★
25% 
1
3 ★
0% 
0
2 ★
25% 
1
1 ★
25% 
1
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    C
    01/09/2022
    Cartwr

    Not good for wheels

    I used on Chroms wheels that are $4k and they messed them up and made them super dull and not shiny. Made streaks on the wheels. I would not recommend wish I could get refund.

    DK
    05/28/2020
    Daniel K.

    Not very good for exhaust

    So Adam shows this as going on your exhaust tips of a CTS-V....I put it on my C5 Corvette BB Fusion quad tip exhaust and after them getting dirty again, well they dont wipe clean and they require the use of Metal Polish #1 and #2 to get shiny again. The use of water and a wheel woolie and APC didnt just clean them up as advertised. Pretty bummed out....

    PQ
    03/31/2020
    Peter Q.

    Good application, not enough product

    I bought this kit with the impression that I would be able to do 4 CCW polished aluminum wheels. Unfortunately, I was only able to do one wheel per wipe. Keep that in mind when ordering. Other than that, it went on fine and it looks great on the wheel. Time will tell the longevity.

    EV
    02/11/2020
    Eric V.

    One step to easy maintenance

    Applied ceramic wipes to my quad exhaust tips and maintenance is down to zero. Black carbon is non existent for days after washing and when it shows up I can literally blast it away with nothing more than a light pressure wash. Easy to use. I just wiped it on and let dry overnight after using a little metal polish. Longevity is great as well. Applied it a couple months ago and still working as it should. Will continue to use in the future. Great product!


     

    Kit Contents:

    • 2 Metal Coating Wipes
    • 2 Edgeless Utility Towels
    • 2 White Gloves
    • 4oz Surface Prep
    • Instruction Sheet

    The introduction of Ceramic Wipes into the industry will greatly reduce the amount of time you spend on each coating application by easily applying the product and walking away without the need for buffing it away! Not only does this control overusing chemicals, but it makes cleanup a breeze as you dispose of the wipe after use. Our current offering of coatings can work on metal substrates, however, you will need to buff off the excess surface oils and residues.


    For Use on Metal:

    Step 1: Use Adam’s Surface Prep and Edgeless Utility Towel and fold the towel into fourths. Prepare your metal and use Adam’s Surface Prep and Edgeless Utility Towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For oxidized and dull metal, polish to perfection with Adam’s Metal Polish 1 & 2 and a microfiber applicator.

    Step 2: Tear Open the Ceramic Metal wipe from the packaging and put on pair of gloves. With the gloves on, open and remove the contents of the wipe and begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. As this coating is a wipe on and walk away process, you will notice the product begin to flash and eventually rainbow out after 3-5 minutes depending on the surface.

    Step 3: Allow coating to fully cure for 1-2 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once cured, you’re free to enjoy the open road and have clean, protected metal surfaces no matter how harsh the conditions.

    Stay In The Loop